CR30NX – High Speed Refrigerated Centrifuge
CR30NX is a High-speed Refrigerated Centrifuge from himac
High-end Technologies
All rotors maintained at 4℃ at maximum rotor speed.
Powerful refrigeration system with appropriate vacuum control
Low-noise
With the latest noise reduction system, the operating sound level is 56 dBA; the quietest in this class high-speed refrigerated centrifuges, as of June 2018.
New rotor ID detection and self-locking rotor system
Rotor model and its maximum speed are automatically identified just the rotor is placed on the drive shaft.In addition, rotor system is self-locking and no need install the rotor by screw, same as existing himac high-speed centrifuges.
- rotor speed
- rotor temperature
- rotor ID
- vacuum level
MFRS : Mist filter refresh system
Rotating the filter regularly by the motor, oil is removed from the filter and returned to the vacuum pump.
For more information about this product, click here
110,000 xg Swinging bucket rotor
Do you need an ultracentrifuge, because you need 100,000 xg for a swing rotor centrifugation?
With 110,000 xg swing rotor centrifugation, CR30NX andtop loading swing rotor R25ST supports your Rate zonal centrifugation or Isopycnic centrifugation.
110,000 xg Fixed angle rotor
Or with 110,000 xg angle rotor centrifugation,CR30NX supports your cell fractionation.
6,000 mL rotors
And, in CR30NX, two types of 6,000 mL rotors are available; R7A (6 x 1,000 mL bottle) and R9A2 (4 x 1,500 mL bottle).
| Model | CR30NX |
|---|---|
| Maximum speed | 30,000 rpm (R30AT Fixed angle rotor) |
| Maximum RCF | by Swinging bucket rotor: 110,000 xg (R25ST) ，by Fixed angle rotor: 110,000 xg (R30AT) |
| Max. Nominal Capacity | 6,000mL : R7A Fixed angle rotor (6 x 1,000mL) or R9A2 Fixed angle rotor (4 x 1,500mL) |
| Speed Control Range | 300 rpm to 30,000 rpm (*1) |
| Temperature setting range | -20 ℃ to +40 ℃ |
| Temperature Accuracy | ± 2 ℃ (*2) |
| Acceleration/ Deceleration mode | Accel 11 modes, Decel 10 modes with 2 modes variable deceleration slope |
| Program Function | 1,000 programs |
| Drive unit | Induction Motor (Inverter) |
| Refrigerator | Rotary Inverter Driven Compressor (Refrigerant: R410A) |
| Interface | USB X 1, LAN X1 |
| Display | High-resolution 6.5 inch color LCD |
| Keypad | Touch sensitive LCD panel with GUI icons |
| Safety devices | Door interlock, dual-overspeed detector, imbalance detector,rotor cover detector,over-temperature detector |
| Noise Level | Less than 56 (dBA) |
| Applicable standard | CE, cCSAus (*3) |
| 1) EMC Directive | EN61326-1 |
| 2)Product safety | EN61010-1, EN61010-2-020 UL Std. No. 61010-1, UL Std. No. 61010-2-020 (*3) CAN/CSA-C22.2 No. 61010-1, CAN/CSA-C22.2 No. 61010-2-020 (*3) |
| Power Requirement | Single Phase : AC200/208/220/230/240V +/-10%, 50/60Hz, 30A Three-phase four-wire : AC 380 / 400 / 415V (*5), +/- 10%, 50/60Hz, 2 x 16A |
| Heat Output | Less than 1,2 kW (*4) |
| Dimension | 708 mm (W) x 892 mm (D) x 866 mm (H) (height to table 865 mm) |
| Weight | 310 Kg |
| Part No. (Asia/Pacific/Middle East) | 913355C1 |
| Part No. (EU market/India) | 913355C2 |
| Part No. (US/Canada) | 913355C3 (*3) |
| Part No. (EU market : Three-phase four-wire) | 913355C4 |
| Catalogue | CR-30NX catalogue (PDF:3,200KB) |
- R9A2 Fixed angle rotor’s minimum rotation speed setting is 2,000 rpm.
- Temperature calibration may be required depending on users’ operating conditions and operating environments.
- For Canada and United States model, only.
- When R30AT Fixed angle rotor runs at 30,000 rpm
- Unbalanced three-phase (two-phase used). Neutral connection required.