CR7N

Easy operation with color touch-sensitive LCD

Color touch-sensitive LCD and GUI (graphic user interface) with high contrast against a back screen in black color enables users to easily operate the system or select various menus and functions by touching an icon on the display. Of course, operation status is identified at a glance by intelligible screen design.

Programmed operation

• You can register 30 programs for programmed operation to the system. In addition to the 30 programs, you can set 3 programs of 3-step-mode operation. This function is useful for routine operations in production sites.

Pre-cool function

• This function maintains temperature inside the rotor chamber at 15 ºC with preventing from icing, in order to reduce electricity consumption and reach target temperature faster while the door is closed.

Automatic standby function

• CR7N has automatic standby function in it. If the display is not touched for a set weight time, the system automatically deems backlight of the LCD and stop refrigerator (except at a running) so that system reduces approx.. 52% of standby electricity *.
  Just press a button, so you can contribute to the energy saving.
  
  •  comparing with standby electricity consumption without automatic standby function under in-house test condition with door closed.

User administration

• You can register up to 50 users into the memory. You can set access level and PIN of each user. There are three access levels, “Administrator”, “Supervisor” and “User”.

User Lockout Function

• In case the user lockout function is enabled, only registered user can login the system by entering registered 4 digits PIN. It is a useful function to control user access to the system in production sites.

Pilot lamp (option)

• Optional pilot lamp shows an operating status of the CR7N. High brightness LED lights offer higher visibility, an operating status of the CR7N is easily recognized by the operator at away from the centrifuge. It is useful for a production site. The pilot lamp lights in red, green and blue color, and indicate the status of stop, acceleration, running at a set speed, deceleration and alert by the color and luminous pattern.
  

USB

• Optional USB port is available. The system records up to 100 operating histories in its memory. The operating data can be output in CSV format through the USB port. (You can also browse operating histories on the display.)

LAN

Optional LAN port is also available. You can link CR7N to your PC through Ethernet or internet. Optional software “himac LogManager Ver.5.0 (network edition)” can be installed in your PC and operating history and data of CR7N can be easily managed by your PC.

himac LogManager Ver. 5.0 for Windows ® (Network Edition) – optional log management software

himac LogManager Ver. 5.0 for Windows ® (Network Edition) is useful and convenient software to manage real-time operating log of himac CP-NX series, CP-WX series, CS150NX, CS150FNX, CR30NX, CR22N and CR7N. Maximum 16 units of abovementioned centrifuges can be registered to the software at once. As data communication between the centrifuges and PC is done via LAN, so there is no distance limitation to establish a network. You can easily establish the network configuration and relocation with commercially available LAN devices. (Optional LAN board is required for the centrifuges.) It means you can manage the operation log at the different location from the installation sites of the centrifuges.
The software is real-time log management software; recording period is selectable from 10 seconds to 5 minutes interval. Of course, the software supports U.S. FDA 21 CFR Part 11, following functions are available;

• Encrypted data files etc.
• Audit trail
• Encrypted data files etc.

Compatible OS;
Windows® 8 and Windows® 10
Windows®, Windows® 8 and Windows® 10 are registered trademark of Microsoft Corporation in the United States and other countries.